ATI 101 CM - Product Specs              Close this window
MACHINE SPECIFICATION  
Machine Base Fine grain black granite
Dimensions and Weight 50D X 34W X 76 H
  (1.28 X.87 X 1.94)
  2800 lbs(1260 kg)
Power Input 208-480 VAC, 3 phase
  30A-15A, 50-60 Hz plus ground
  Other power inputs available
Axis Positioning Split axis system
  Table motion along the Y axis
  Spindle carriage along X axis
Table/Carriage  
Guide And Support Precision steel linear guides
Leadscrews Precision ground X, Y and Z
  Recirculating pre-loaded ball screws
Position Accuracy +/ 0.0005(+/ 0.0127mm)
Position Repeatability +/ 0.0002 (+/0.0051mm)
Tooling Plates Phenolic with conductive foam and copper
  Ground strip
Maximum Panel Size 14 X 20 (356 X 508 mm)
   
SPINDLE SPECIFICATION  
Number of Spindles 1
Spindle Drive Belt driven, 1 hp variable from 3,000 to 24,000 RPM
Collets Pneumatically operated
Router Bit Sizes 0.031-0.250 (0.79-6.35mm)
   
CONTROL SYSTEM SPECIFICATION  
Controller PMC-450, 32 bit Motorola 68040 processor
Data Input/Output 3-1/2 Dos compatible floppy
Software PSOS
CRT 14 EGA Color
   
OPERATING REQUIREMENTS  
Ambient Temperature 72 degrees +/ 2 degrees F
  (22 degrees +/ 1 degree C)
Ambient Humidity 45-60% RH
Air Input 105-150 psig at 23 scfm flow
  ( 7.4-10.5 kg/cm2 at 651 l/min
  Filtered to better than 0.01 microns
  99.99% free from oil and water
Debris Vacuum Requirement 240 scfm at 41 inches of water
  (6796 l/min at 1041mm of water)
   
OPTIONS 9 Position automatic tool changer
Status Light
Stripper Plate